Updating wwan roaming on verizon
Example Configuration: The 6in4 tunnel mode utilizes explicit IPv4 tunnel endpoints and encapsulates IPv6 packets using 41 as the specified protocol type in the IP header.A 6in4 tunnel broker provides a static IPv4 server endpoint, decapsulates packets, and provides routing for both egress and ingress IPv6 packets.If changes are made to a Device configuration that cause it to differ from it's assigned Profile, then a new Profile matching the changes will be created with the device automatically assigned to it.The Edit screen for a WAN Interface type will only display features that are configurable for that WAN type.
Generally speaking, the APN you configure determines the IP address that your Opengear device is assigned.IPv6 auto-configuration mode uses DHCPv6 and/or SLAAC to configure the IPv6 networks.When you select Auto, all of the following settings are optional (depending on your provider’s requirements): Example Configuration: Out of the box, 6to4 is the simplest mode to enable full end-to-end IPv6 connectivity in an organization if the upstream ISP properly routes packets to and from the 6to4 unicast relay servers.Most tunnel brokers provide a facility to request delegated networks for use through the tunnel.Example Configuration: IPv6 Rapid Deployment (6rd) is a method of IPv6 site configuration derived from 6to4.
Initial service activation was done under Windows -- not sure if this is necessary. Occasionally after a fresh boot, it will not connect with an apparent failure to power on the device. ) Z60 model was report to work always (without the Windows shenanigans). In my T60 is not needed to boot Linux to power on the device.